Effect of Li2O on the crystallization behavior of CaO-Al2O3-SiO2-Li2O-Ce2O3 mold slags

The effect of Li₂O on the crystallization properties of CaO-Al₂O₃-SiO₂-Li₂O-Ce₂O₃ slags was investigated. With increasing the Li₂O content, LiAlO₂ and CaCeAlO₄ were the main crystalline phases. LiAlO₂ formed for the charge compensating of Li⁺ ions to [AlO₄^5?]-tetrahedrons, and CaCeAlO₄ formed as a result of the charge balance of Ce³⁺ ions, Ca²⁺ ions, and [AlO₆^9?]-octahedrons. Increasing the content of Li₂O to 10%, the crystallization temperature was the highest, and the incubation time was the shortest. The crystallization ability was strong due to the three factors of strengthening the interaction between ions and ion groups, decreasing the polymerization degree, and increasing the melting temperature. Further increasing the content of Li₂O, the crystallization performance was obviously suppressed, because the melting temperature and the force between the cations and the anion groups decreased.     

Recent Advances in Late-Stage Construction of Stapled Peptides via C−H Activation

Stapled peptides have been widely applied in many fields, including pharmaceutical chemistry, diagnostic reagents, and materials science. However, most traditional stapled peptide preparation methods rely on prefunctionalizations, which limit the diversity of stapled peptides. Recently, the emergence of late-stage transition metal-catalyzed C−H activation in amino acids and peptides has attracted wide interest due to its robustness and applicability for peptide stapling. In this review, we summarize the methods for late-stage construction of stapled peptides via transition metal-catalyzed C−H activation.     

Fabrication and characterizations of Cr3+-doped ZnGa2O4 transparent ceramics with persistent luminescence

0.5 at.% Cr:ZnGa₂O₄ precursor was synthesized by the co-precipitation method with nitrates as raw materials, using ammonium carbonate as the precipitant. Low-agglomerated Cr:ZnGa₂O₄ powders with an average particle size of 43 nm were obtained by calcining the precursor at 900℃ for 4 h. Using the powders as starting materials, 0.5 at.% Cr:ZnGa₂O₄ ceramics with an average grain size of about 515 nm were prepared by presintering at 1150℃ for 5 h in air and HIP post-treatment at 1100℃ for 3 h under 200 MPa Ar. The in-line transmittance of 0.5 at.% Cr:ZnGa₂O₄ ceramics with a thickness of 1.3 mm reaches 59.5% at the wavelength of 700 nm. The Cr:ZnGa₂O₄ ceramics can be effectively excited by visible light and produce persistent luminescence at 700 nm. For Cr:ZnGa₂O₄ transparent ceramics, the brightness of afterglow was larger than 0.32 mcd/m² after 30 min, which is far superior to that of Cr:ZnGa₂O₄ persistent luminescence powders.     

In-situ synthesis of 15R-Sialon from Al-Si3N4-Al2O3 composite at 1500°C via liquid-phase sintering

In this study, alumina-based composite with 12 wt% Al and 16 wt% Si₃N₄ was designed to achieve the synthesis of 15R-Sialon reinforced alumina composite. To investigate the reaction mechanism, two-step sintered Al-Si₃N₄-Al₂O₃ samples at different temperatures ranging from 600°C to 1500°C were prepared and characterized via X-ray diffraction and scanning electron microscope (SEM). The results revealed that 15R-Sialon was synthesized at 1500°C through a novel liquid Si phase sintering and Si₃N₄ played as a precursor and a reactant. First, Si₃N₄ precursor reacted with Al to form intermediate phases AlN and Si, which were not further transformed below 1400°C. When the sintering temperature was 1500°C, the formed Si presented as a liquid phase, under the influence of which plate-like15R-Sialon was generated from Al₂O₃, residual Si₃N₄, and derived AlN. The obtained Si was also involved in the synthesis of 15R-Sialon and completely transformed. In addition to the AlN from Si₃N₄, the AlN deriving from the nitridation of Al may not react with liquid Si. Compared to 15R-Sialon from liquid Si, plate-like 15R-Sialon with smaller size was generated from AlN, SiO, and O₂.     

Combining molybdenum carbide with ceria overlayers to boost Mo/CeO2 catalyzed ammonia synthesis

The design of an efficient non-noble metal catalyst is of burgeoning interest for ammonia synthesis. Herein, we report a Mo₂C/CeO₂ catalyst that is superior in ammonia synthesis activity. In this catalyst, molybdenum carbide coexisted with the ceria overlayers which is from the ceria support as the strong metal–support interaction. There is a high proportion of low-valent Mo species, as well as high concentration of Ce³⁺ and surface oxygen species. The presence of Mo₂C and CeO₂ overlayers not only leads to enhancement of hydrogen and nitrogen adsorption, but also facilitates the desorption and exchange of adsorbed species with the gaseous reagents. Compared with the Mo/CeO₂ catalyst prepared without carbonization, the Mo₂C/CeO₂ catalyst is more than sevenfold higher in ammonia synthesis rate. This work not only presents an explicit example of designing Mo-based catalyst that is highly efficient for ammonia synthesis by tuning the adsorption and desorption properties of the reactant gases, but opens a perspective for other elements in ammonia synthesis.     

Experimental study on the permeability and self-healing capacity of geosynthetic clay liners in heavy metal solutions

Geosynthetic clay liners (GCLs), which have a very low permeability to water and a considerably high self-healing capacity, are widely used in liner systems of landfills. In this study, a series of experimental tests were carried out under complex conditions on typical commercial GCLs from China. In particular, the effects of pH values and lead ions (Pb²⁺) were tested in addition to other factors. The swelling properties of natural bentonite encapsulated between geotextile components in the GCLs were tested first. The swelling capacity was reduced rapidly at pH values < 3 and concentrations of Pb²⁺ >40 mM. Permeability tests on GCLs with different concentrations of lead ions were then performed by using the self-developed multi-link flexible wall permeameter, and data showed that increases in lead ion concentrations greatly improved the permeability. Finally, self-healing capacity tests were conducted on needle-punched GCLs under different levels of damage. Results showed that the GCLs have a good self-healing capacity with small diameter damage holes (2 mm, close to three times the original aperture), but with a damage aperture larger than 15% of the sample area, the self-healing capacity could not prevent leakage; hence, in certain situations it will be necessary to repair the damage to meet the anti-seepage requirement.     

Changes in physicochemical properties and myofibrillar protein properties in grass carp salted by brining and injection

The aim of this study was to investigate the changes in physicochemical properties and myofibrillar protein properties of grass carp meat during brining and brine injection at 4 °C. The time reached equilibrium was 7 h in brining group and 5 h by injection, where the salt content was about 1.76%. The water content, water holding capacity and yield in injection group (86.59%, 9.18% and 110%, respectively) were higher than brining group (84.76%, 11.47%, and 108%, respectively) at equilibrium point significantly (P < 0.05). This was attributed to the more swollen filament lattices and disordered protein structure in injection group (P < 0.05). The myofibrillar protein structure was compared, including sulphydryl content, surface hydrophobicity, solubility, sodium dodecyl sulphate polyacrylamide gel electrophoresis pattern and secondary structure. The injection group presented the better quality of salted fish meat in shorter time.     

核电厂主泵零转速传感器故障分析及优化研究

主泵零转速信号作为核电厂反应堆冷却剂泵的重要监测和控制信号,关乎主泵的安全稳定运行.结合主泵零转速测量原理,对某核电厂出现的零转速异常案例进行分析,结合电涡流传感器的工作原理及试验测试数据,找出引发异常的根本原因.为了提高转速传感器的工作稳定性,针对引发异常的原因提出了增加探头和泵轴凹凸面间的有效移动距离、修改转速机箱设置和优化安装规程、增强前置器的耐辐照性能的改进措施.     

基于ROS的爬壁机器人控制系统设计

大型压力容器探伤作业中,存在效率低、危险性高、成本高等问题,为提高自动化和智能检测水平,研制出一款爬壁机器人进行探伤检测.该爬壁机器人基于机器人操作系统(ROS)进行系统软件开发,以开源硬件Beagle Bone Black为核心搭建硬件平台,采用永磁吸附式移动平台搭载探伤检测仪器方式,对工件进行无损探伤检测作业.现场试验结果表明,爬壁探伤机器人可以替代人工进行探伤作业,控制系统性能良好、稳定,能够实现对机器人的精准控制,有效探伤速度可达40 mm/s,兼具有人机界面友好、智能化水平高、易于扩展等特点,极大地提高了作业效率,并降低了作业风险.     

坡法浅析——坡顶作为空间设计的方法及其在工程中的运用

从基于"作为空间边界的坡顶"的认识和"从单一坡顶到单元坡顶"的可操作性两方面,结合案例分析了"坡顶作为空间设计的方法"的可能性;详述了"坡法"在延庆园艺小镇文创中心工程中的运用.